Normal view

There are new articles available, click to refresh the page.
Before yesterdayMain stream

Thermalright launches Dynamic Vision PRO 360 AIO with massive display

14 July 2026 at 12:00

Thermalright has introduced the Dynamic Vision PRO 360 ARGB Black, a new 360mm all-in-one liquid CPU cooler with a massive 5.5-inch display on top of the CPU block and a dedicated VRM fan. 

The Dynamic Vision PRO 360 ARGB Black cooler stands out with its 5.5-inch LCD screen, which is mounted onto the CPU block magnetically, making it easy to remove or adjust the angle. Below the screen, the water block integrates a dedicated VRM fan operating at 2500RPM to deliver 20.8CFM of airflow and 2.3mmH2O of static pressure, while the pump runs at up to 6800RPM.

The radiator is equipped with the TL-U36, a 25mm-thick single-frame that houses three fans. At the centre of each fan is an infinity mirror effect, along with ARGB lighting going around each fan, with an extra ARGB LED strip running along the full length of the frame. Performance specs show the fans topping out at 2400RPM, pushing up to 71.5CFM of airflow alongside 2.69mmH2O of static pressure.

KItGuru Says: Would you prefer an oversized display for your AIO, or do you prefer smaller displays that sit directly inside the CPU block? 

The post Thermalright launches Dynamic Vision PRO 360 AIO with massive display first appeared on KitGuru.

MSI introduces MEG Maestro 900R full-tower case and curved AMOLED AIO cooler

10 July 2026 at 16:00

MSI has officially unveiled its new flagship case and CPU cooler: the MEG Maestro 900R full-tower chassis and the MEG Coreliquid E15 360 all-in-one liquid CPU cooler. Both products feature premium aluminium construction and advanced structural designs for enthusiast system builders.

The MEG Maestro 900R full-tower case uses a unique “Centered Architecture” that places the motherboard, graphics card, and cooling hardware at the absolute centre of the chassis. This layout pairs with a triple-sided panoramic tempered-glass exterior and features a signature 75º aluminium geometry. To assist with system assembly, MSI includes a detachable, rotatable motherboard tray that can function independently as an open test bench across four installation orientations. The company also bundles a PCIe Gen5 x16 riser cable and a vertical GPU mounting bracket to facilitate centred graphics card positioning.

Accompanying the case is the MEG Coreliquid E15 360 AIO liquid cooler, which features an integrated 110º curved 2K AMOLED display capable of rendering naked-eye 3D content. MSI uses a magnetic Pogo-pin connection to attach the screen to the pump block, removing visible cables from the central CPU area. System communications like screen data, pump power, fan speeds, and ARGB lighting route through a single cable via the EZ Conn system.

Regarding thermals, MSI says the Laminar Focus technology runs the centre fan clockwise while the outer fans spin counter-clockwise to reduce turbulence. A three-phase sensorless motor powers the pump, while an integrated Cooling Safeguard system flashes a red warning light if it detects abnormal fan speeds.

KitGuru says: Interested in any of MSI's new high-end MEG components?

The post MSI introduces MEG Maestro 900R full-tower case and curved AMOLED AIO cooler first appeared on KitGuru.

New Chieftec Iceberg Pro 360 AIO series features interlocking fans and VRM cooling

9 July 2026 at 08:45

Chieftec has introduced the Iceberg Pro 360 series, a new lineup of 360mm all-in-one liquid CPU coolers featuring an integrated centrifugal VRM fan built directly into the pump housing.

The new series includes two distinct models: the Iceberg Pro 360 RGB and the Iceberg Pro 360 Dark. Both configurations deploy a 360mm aluminium radiator alongside an aerospace-inspired pump design. Chieftec aims to improve overall motherboard thermal performance by using the integrated pump fan to actively direct airflow over nearby VRMs, M.2 SSDs, and memory modules.

Cable management and installation are said to be streamlined with the company's Snap-On interlocking 120mm radiator fans, which spin up to 2200 RPM. Other performance figures for the fans include a rated airflow of 64.72 CFM and a rated air pressure of 3.06 mmH2O. The VRAM fan speed is rated at 500-2200RPM.

Illumination choices separate the two variants: the RGB model uses ARGB/PWM fans, while the Dark edition swaps them for non-illuminated PWM fans to achieve a clean, all-black look. Aside from the fans, both coolers share the same structural framework. Socket compatibility spans Intel LGA1851, LGA1700, LGA1200, and LGA115x, as well as AMD AM5 and AM4.

KitGuru says: Integrating a VRM fan into an AIO pump block isn't new, but it's proven to help reduce temperatures. Do you consider a VRM fan a plus when choosing AIOs, or is it something you just ignore?

The post New Chieftec Iceberg Pro 360 AIO series features interlocking fans and VRM cooling first appeared on KitGuru.

Noctua confirms its NL-LC1 AIOs will also be available in chromax.black

7 July 2026 at 08:30

Noctua confirmed the upcoming release of its “NL-LC1 chromax.black series” AIO liquid coolers via its official YouTube account. In response to a user query, the company stated that the all-black variant is planned for release around the end of the year, even though it hasn't been mentioned in the updated roadmap.

Wccftech was the first to spot Noctua's comment on YouTube. Standard configurations for the original NL-LC1 series, launched on June 16th (and our review HERE), represent the brand's very first foray into the all-in-one liquid cooling market and are available in 240mm, 360mm, and 420mm sizes. Noctua equips the 240mm and 360mm versions with NF-A12x25 G2 fans, while the larger 420mm unit uses NF-A14x25 G2 fans.

All three models are built around the Asetek Emma V2 platform and include the custom NL-PNA1 pump noise absorber. The integrated pump firmware features three selectable speed profiles: quiet, balanced, and manual. Each package also contains a tube of NT-H2 thermal paste and comes backed by a 6-year manufacturer's warranty.

Pricing for the existing standard models is set at $219.90/€219.90 for the NL-LC1-24, $249.90/€249.90 for the NL-LC1-36, and $279.90/€279.90 for the NL-LC1-42. Buyers can also pick up the optional NL-ACF1 auxiliary fan for $19.90 to replace the magnetic pump faceplate. For the chromax.black, pricing should be slightly higher, as usual for the series.

KitGuru says: An all-black chromax.black version of the NL-LC1 will be a welcome option for builders who want Noctua's liquid-cooling performance without the traditional brown-and-beige aesthetic.

The post Noctua confirms its NL-LC1 AIOs will also be available in chromax.black first appeared on KitGuru.

June 2026 AIO CPU Cooler Round Up Multi Review

22 June 2026 at 10:15

Today we’re going big on AIO coolers – seven of them in fact! We’ve got new hardware from ASRock, Cooler Master, CPS PCCOOLER, DeepCool, Enermax and Sudokoo to look at, all featuring integrated pump-mounted displays and targeting a wide range of price points. In this multi-review, we’ll be looking at thermals, noise, build quality and value for money to find out which ones are genuinely impressive, and which ones are just flashy-looking screens with a pump attached.

Timestamps:

00:00 Intro
00:44 ASRock Challenger 360 Digital
07:40 ASRock Phantom Gaming 360 LCD
14:56 Cooler Master MasterLiquid Core Nex Digital 360 Black ARGB
21:01 CPS PCCOOLER GT360M ARGB Display
26:23 Deepcool Spartacus 360
31:20 Enermax Liqmax IV 360
35:07 Sudokoo Energlo 360
40:10 General installations
40:44 Thermal + acoustic performance
44:49 Closing thoughts

ASROCK Challenger 360 Digital – CCL £88.99 black HERE – £95.99 White HERE.

Features

  • 3-inch digital display with real-time monitoring — Challenger 360 Digital features an integrated pump-top display showing key system stats like CPU temperature, frequency and pump speed.
  • Next-gen pump design — With 3-phase, 6-slot, 4-pole motor and a dual-side inlet design and a precision copper cold plate for optimal coolant and efficient heat dissipation.
  • Streamlined installation — Pre-mounted fans, hidden cable routing and a universal mounting system, alongside features like ring-frame fan blades and 0dB fan stop support to balance airflow performance with quieter operation.

Specification:

  • CPU Socket Compatibility: AMD AM5, AM4 | Intel LGA1851, LGA1700
  • Radiator Material: Aluminium
  • Radiator Dimensions: 394 x 119.6 x 27 mm
  • CPU Block/Pump Dimensions: 85 x 84.1 x 53.5 mm
  • Pump Speed: 1200–3200 ±10% RPM
  • Cold Plate Material: Mico-Skived Copper
  • Pump Connector: 4-pin PWM
  • Fan Dimensions: 120 x 120 x 25.4 mm
  • Fan Speed: 0–2100 ±10% RPM
  • Air flow: 6 CFM
  • Air Pressure: 77 mmH₂O
  • Fan Noise: 31 dB(A)
  • Fan Connector: 4-pin PWM
  • LCD Screen: 3-inch segment LED display
  • Warranty: 6 years (AIO cooler module)

Pros:

  • The digital display is bright and easy to read data.
  • Reasonable noise at max fan speed.
  • Daisy-chained fans reduce cable clutter.

Cons:

  • Light bleed from the LEDs on the fans is not well diffused.
  • Requires a driver to run the screen.
  • No screen rotation.

Rating: 8.5.

ASRock Phantom Gaming 360 LCD – CCL £169.99 HERE.

Features

  • 4-inch full-colour LCD — Equipped with a full-coverage display that shows real-time system stats, images or animations, all configurable through ASRock’s Polychrome Display software.
  • Next-gen cooling system with dual-inlet design — 3-phase, 6-slot, 4-pole pump, paired with a dual-side inlet cooling path for improved thermal efficiency and more consistent temperatures under load.
  • 360° Halo ARGB fan system — Integrated halo lighting with a single-cable fan design, combining high airflow FDB fans with streamlined cable management for cleaner installs and synchronised lighting.

Specification:

  • CPU Socket Compatibility: AMD AM5, AM4 | Intel LGA1851, LGA1700
  • Radiator Material: Aluminium
  • Radiator Dimensions: 397 x 120 x 32 mm
  • CPU Block/Pump Dimensions: 4 x 86 x 107.6 mm
  • Pump Speed: 1200 – 3100 ± 10% RPM
  • Cold Plate Material: Micro-Skived Copper
  • Pump Connector: PWM (4-Pin)
  • Fan Dimensions: 362 x 123 x 28 mm
  • Fan Speed: 0 – 2400 ± 10% RPM
  • Air flow: 28 CFM
  • Air Pressure: 11 mmH20
  • Fan Noise: 4 dB(A)
  • Fan Connector: PWM (4-Pin)
  • VRM Fan Dimensions: 70 x 70 x 25 mm
  • VRM Fan Speed: 3000 ± 10% RPM (Max)
  • VRM Fan Connector: PWM (4-Pin)
  • LCD Screen: 4” IPS LCD, 480 x 480, 60Hz, 24-bit, 250 cd/m2
  • Warranty: 6 Years (AIO Cooler Module), 2 years (Display Module)

Pros:

  • Decent-looking screen with plenty of customisation options.
  • Solid cooling performance.
  • Single-frame fan looks neat with minimal wiring.

Cons:

  • CPU block is very tall.
  • Quite loud at max fan speed.
  • Requires several software apps to operate the screen, RGB and fan speed.

Rating: 7.5.

Cooler Master MasterLiquid Core Nex Digital 360 Black ARGB – OcUK £89.99 HERE.

Features

  • Hexagonal digital display with real-time system monitoring — MasterLiquid Core NEX Digital 360 features an integrated top-mounted screen capable of displaying CPU/GPU temperatures, usage, fan speeds and pump RPM via Cooler Master’s MasterCTRL software.
  • Refined dual chamber pump architecture — Featuring Cooler Master’s updated G9R dual chamber design with improved water pressure and optimised coolant flow for enhanced heat transfer efficiency.
  • Simplified all-in-one installation — Pre-installed fans, streamlined cabling, pre-applied thermal paste and pre-mounted brackets help reduce installation complexity while maintaining a cleaner overall system build.

Specification:

  • CPU Socket Compatibility: Intel LGA 1851 / 1700 / 1200 / 1156 / 1155 / 1151 / 1150, AMD AM5 / AM4
  • Radiator Material: Aluminium
  • Radiator Dimensions: 394 x 119.6 x 27.2 mm
  • CPU Block/Pump Dimensions: 6 x 78.5 x 68.6 mm
  • Pump Speed (Max): 3200 ±10% RPM
  • Tubing Length: 400mm
  • Cold Plate Material: Micro-Skived Copper
  • Pump Connector: 3-Pin ARGB + 4-Pin PWM
  • Fan Dimensions: 120 x 120 x 25 mm
  • Fan Speed: 650–1750 RPM ±10%
  • Air flow: 4 m³/h (71.9 CFM) Max
  • Air Pressure: 86 mmH₂O Max
  • Fan Noise: 2 dBA Max
  • Fan Bearing: Rifle Bearing
  • Fan Connector: 7-Pin PWM + ARGB
  • LCD Screen: LED Digital Display, 50.1 x 54.4 mm, 120 cd/m²
  • Screen Connector: USB 2.0 9-Pin
  • Warranty: 5 Years

Pros:

  • Daisy-chained fans reduce wiring.
  • Quick and easy.
  • Clear and easy to read display.

Cons:

  • Very loud at max fan speed.
  • Average 40 dba thermal performance.
  • Some Cable clutter at the CPU block.

Rating: 7.

CPS PCCOOLER GT360M ARGB Display – £85.99 Amazon in black or white HERE.

Features

  • 5-inch high-resolution LCD display — GT360M ARGB Display features a customisable IPS screen capable of showing real-time system monitoring data, animations, wallpapers and video playback through CPS control software support.
  • Next-generation ceramic bearing pump design — Equipped with a second-generation large chamber pump, ultra-fine micro water channels and an all-ceramic bearing structure designed to improve coolant flow, reduce operational noise and extend long-term durability.
  • Streamlined cable management and installation — Factory pre-installed fans, integrated hidden wiring and a quick-release mounting system help simplify the build process while maintaining a cleaner overall system appearance.

Specification:

  • CPU Socket Compatibility: Intel LGA115X / 1200 / 1700 / 1851, AMD AM4 / AM5
  • Radiator Material: Aluminium
  • Radiator Dimensions: 394 x 120 x 27 mm
  • CPU Block/Pump Dimensions: 5 x 90 x 85 mm
  • Pump Speed (Max): 2600 RPM ±10%
  • Cold Plate Material: Mico-Skived Copper
  • Pump Connector: 4-Pin
  • Fan Dimensions: 120 x 120 x 25 mm
  • Fan Speed: 500–2200 RPM ±10%
  • Air flow: 8 CFM
  • Air Pressure: 2 mmH₂O
  • Fan Noise: 15–33.7 dB(A)
  • Fan Bearing: Hydro Bearing
  • Fan Connector: 4-Pin PWM
  • LCD Screen: 8-inch, IPS, 320 × 240 pixels
  • Warranty: 3 Years

Pros:

  • Solid cooling performance.
  • Daisy-chained fans neaten up wiring.
  • Decent Price.

Cons

  • A little loud at max fan speed.
  • Screen customisation is limited.
  • Screen brightness and clarity aren’t the best.

Rating: 8.

Deepcool Spartacus 360 – £159.99 HERE.

Features

  • 4-inch IPS LCD with modular customisation — SPARTACUS 360 features a 480×480 IPS display with 16.7 million colours, supports system monitoring layouts, GIFs, video playback and dynamic graph modes through DeepCreative software integration.
  • 6th-generation pump with AI-tuned cooling control — Equipped with a 3-phase, 6-slot, 4-pole Gen 6 pump and DeepCreative AI algorithms that dynamically tune pump and fan speeds for quieter operation and up to 320W of heat dissipation performance.
  • Semi-integral blade fans with streamlined connectivity — High-performance 120mm fans use a reinforced semi-integral blade design for improved airflow stability and lower noise, while DeepCool’s single 10-pin connection design dramatically cuts cable clutter during installation.

Specification:

  • CPU Socket Compatibility:
  • Radiator Material: Aluminium
  • Radiator Dimensions: 402 × 120 × 27 mm
  • CPU Block/Pump Dimensions: 99 × 91 × 65 mm
  • Pump Speed: 500–3400 RPM ±10%
  • Cold Plate Material: Micro-Skived Copper
  • Pump Connector: 4-Pin PWM
  • Tube Length: 410 mm
  • Fan Dimensions: 120 × 120 × 25 mm
  • Fan Speed: 500–2500 RPM ±10% – 0% Mode below 5% PWM duty
  • Air flow: 89 CFM
  • Air Pressure: 30 mmAq
  • Fan Noise: ≤32.23 dB(A)
  • Fan Connector: 4-Pin PWM
  • Bearing Type: Hydro Bearing
  • LCD Screen: 4-inch TFT LCD, 480 × 480 pixels
  • LED Type: Addressable RGB LED
  • LED Connector: 3-Pin (+5V-D-G)
  • Warranty: 5 Years

Pros:

  • Single cable at the pump gives a clean look.
  • Screen looks great.
  • Has a high-quality feel to it.

Cons:

  • Very loud at max fan speed.
  • No individual fan and pump speed adjustment using DeepCool software.
  • No extra thermal paste included.

Rating: 7.5.

Enermax Liqmax IV 360 – Amazon £56.54 HERE.

Features

  • Magnetic rotatable digital display with real-time monitoring — LIQMAX IV 360 features a magnetic pump-top status display that can be manually rotated for cleaner orientation while providing live CPU temperatures, fan speeds and system monitoring data.
  • Patented dual-chamber pump with Gen.2 Xtreme technology — ENERMAX pairs a larger 35% expanded copper base with its Gen.2 Xtreme Pump design, delivering a claimed 31% increase in coolant flow rate and cooling capacity rated up to 390W TDP.
  • Quiet high-performance cooling setup — PWM-controlled radiator fans and pump operation are tuned to balance airflow and acoustics, with 500–1800RPM fan speeds and low-noise operation designed to keep high-end systems under control.

Specification:

  • CPU Socket Compatibility: Intel LGA 1851 / 1700 / 115x / 2066, AMD AM5 / AM4
  • Radiator Material: Aluminium
  • Radiator Dimensions: 394 x 120 x 27 mm
  • Pump Speed: 1500 – 3100RPM
  • Cold Plate Material: Micro Skived Copper
  • Pump Connector:
  • Fan Dimensions: 120 x 120 x 26.8 mm
  • Fan Speed: 500–1800 RPM ±10%
  • Air flow: 03 CFM
  • Air Pressure: 4 mmH₂O
  • Fan Noise: 46 dBA
  • Fan Connector: 4-Pin PWM
  • LCD Screen: Digital Display
  • Warranty: 3 years

Pros:

  • Good value.
  • Easy installation and minimal software setup.
  • Functional but minimal aesthetics.

Cons:

  • Minimal screen customisation.
  • No RGB.
  • Short Warranty.

Rating: 7.

Sudokoo Energlo 360 – Amazon UK £121.99 HERE.

Features

  • Segmented pump display with real-time system monitoring — ENERGLO 360 features a pump top-mounted modular segmented screen on the that displays CPU temperature and system status in real time, without requiring external software.
  • High-performance PWM pump with wide speed control range — Equipped with a high-performance pump with a speed range of 2500–3400 RPM, designed for efficient thermal transfer while maintaining quiet operation.
  • 360mm triple-fan cooling array with high airflow performance — Includes three 120mm PWM fans delivering up to 73.41 CFM airflow with strong static pressure, optimised for high-efficiency cooling at high-demand workloads.

Specification:

  • CPU Socket Compatibility: Intel LGA1851 / 1700 / 1200 / 1151 / 1150 / 1155, AMD AM5 / AM4
  • Radiator Material: Aluminium
  • Radiator Dimensions: 402 × 120 × 27 mm
  • CPU Block/Pump Dimensions: 96 × 81 × 80 mm
  • Pump Speed: 2500–3400 RPM ±10%
  • Cold Plate Material: Micro Skived Copper
  • Pump Connector: 4-Pin PWM
  • Tubing Length: 410 mm
  • Fan Dimensions: 120 × 120 × 25 mm
  • Fan Speed: 500–2500 RPM ±10%
  • Air flow: 41 CFM
  • Air Pressure: 69 mmAq
  • Fan Noise: ≤35.63 dB(A)
  • Fan Connector: 4-Pin PWM
  • Bearing Type: Fluid Dynamic Bearing
  • LCD Screen: Yes
  • Warranty: 5 years

Pros:

  • Nice-looking display
  • Feels high quality
  • CPU block customisation is a nice touch.

Cons:

  • Quite loud.
  • Software can be a bit fussy if your Windows isn’t up to date.
  • RGB strips make the fans very bulky – might be a problem for space in some cases.

Rating: 7.5.

Test System Specifications:

  • CPU – AMD Ryzen 9 9950X
  • Motherboard – ASRock Phantom Gaming X870E Nova WiFi
  • Memory: 32GB (2 x 16GB Modules) G.SKILL Trident Z5 RGB DDR5-6000
  • Graphics card: MSI Radeon RX 6600 XT Gaming X
  • Storage: 1TB Corsair MP600 Elite PCIe Gen4x4 NVME M.2 SSD
  • Power Supply: Seasonic Prime TX-1000
  • Chassis: Open Test Bench
  • Thermal Compound: Arctic MX-6
  • O/S: Windows 11 Version 24H2

Testing Methodology:

We are primarily focusing on the performance of each cooler at 100% fan speed and also when locked to 40dBA noise output. We will focus on cooling performance using a manual overclock with all-core frequency and VCORE locked to 5.2GHz/1.3V (AMD) and 5.5GHz/1.3V (Intel) and Precision Boost Overdrive performance.

  • The test data is logged using HWINFO and the final 10 minutes of the data is calculated to find the average CPU temperature and CPU clock multiplier (AMD PBO Test) and then plotted in the charts.
  • For testing, we use a 30-minute looped run of Cinebench R23 and record the steady-state CPU temperature at the end of the test. This ensures that the CPU has had ample time to warm up and reach a steady state under all of the coolers.
  • The ambient is maintained at 19-21 degrees Celsius. Where there is variation beyond this temperature range, we add extra repeated tests to ensure consistency. However, this is well controlled now with A/C.
  • We also test each cooler with at least two fresh installs (typically three) to mitigate the likelihood of poor mounting spoiling results.
  • Ambient temperature and humidity are controlled via a mini split air conditioning system inside the test room. Ambient temperature is maintained between 19-20°C; temperature delta figures are shown in the charts (ambient temperature is deducted from the measured component temperature).

Test Results:

Acoustics

We will start by looking at noise output which gives us a good indication of thermal performance based on noise.

When looking at noise output with the fans and pump operating at max speed, there’s quite a wide spread between the coolers on test. The quietest is the ASRock Challenger 360 Digital at 47dBA, which puts it among the quieter coolers in our database overall. The Enermax Liqmax IV 360 also performs well at 48dBA, while the CPS PCCOOLER GT360M ARGB Display sits in the middle at 51dBA.

At the louder end of the chart are the ASRock Phantom Gaming 360 LCD and Cooler Master MasterLiquid Core Nex 360 ARGB both at 52dBA, which is noticeable but still quite typical for 360mm liquid coolers running flat out. The Sudokoo Energlo 360 comes in slightly higher at 53dBA, while the loudest cooler of this group is the DeepCool Spartacus 360 at 55dBA. That’s definitely getting loud enough to be quite distracting.

Thermal Performance: AMD Ryzen 9 9950X

With fans and pumps still running at max speed, thermal performance from the coolers on test is competitive, with only  2°C  separating the best and worst results in this test. Leading the pack are the CPS PCCOOLER GT360M ARGB Display, DeepCool Spartacus 360 and Sudokoo Energlo 360, all at  59°C CPU over ambient under steady-state load, which places them among the top performing AIOs in our chart overall.

Just behind are the ASRock Challenger 360 Digital and Phantom Gaming 360 LCD, alongside the Cooler Master ML Core Nex 360 ARGB, with all three producing a 60°C delta result. While not chart-topping, the difference in real-world terms is small and well within the range you would expect from good 360mm liquid coolers. The Enermax Liqmax IV 360 Display trails slightly at 61°C, though again the margin is minimal.

At a noise-normalised level of 40dBA, the thermal results provide a clearer indication of efficiency once acoustics are taken into account. At the top we see the ASRock Challenger 360 Digital and Phantom Gaming 360 LCD, both with a 63°C delta, placing them in the top end of the chart. Just behind them is the Sudokoo Energlo 360 at 64°C over ambient, followed by the CPS PCCOOLER GT360M ARGB Display and the DeepCool Spartacus 360 at 65°C. suggesting similar efficiency once acoustics are equalised.

Further back is the Enermax Liqmax IV 360 at 66°C over ambient, while the Cooler Master MasterLiquid Core Nex 360 ARGB trails slightly further at 67°C. These results indicate both models lose efficiency when limited to a 40dBA noise target, relying more heavily on higher fan speeds to maintain thermal performance.

Switching to AMD PBO testing, the results reflect a more real-world scenario where we see how effectively coolers can maintain boost clocks under sustained load. The strongest results come from the ASRock Phantom Gaming 360 LCD, which posts a 52.5x clock multiplier and 63°C delta, placing it among the top-performing units in the PBO test. The ASRock Challenger 360 Digital follows with the same clock multiplier but just 1°C higher delta so basically producing the same CPU performance.

Just below is the Deepcool Spartacus with the same 52.5x clock multiplier at 65°C and the Sudokoo Energlo at 66°C delta, again with a 52.5 x multiplier. Further back with a clock multiplier of 52.4x are the Cooler Master ML Coer Nex Digital at 64°C delta, the CPS PCCOOLER GT360M at 64°C and the Enermax trails at 66 °C over ambient. While these results place them behind the best coolers, the clock multipliers are narrow enough that, under AMD PBO conditions, all of the tested 360mm AIOs deliver similar sustained boost behaviour.

KitGuru says:  In terms of real-world performance, all of these coolers are quite closely matched. However, in terms of best value for money, I'd go with the ASRock Challenger 360 Digital as it combines good thermals, low max fan speed noise and a decent-looking screen at a reasonable price.

The post June 2026 AIO CPU Cooler Round Up Multi Review first appeared on KitGuru.

New Asus ROG Strix LC IV AIO coolers feature wireless Q-Connector module

21 June 2026 at 15:45

Asus has announced the launch of its ROG Strix LC IV series of AIO liquid CPU coolers, featuring the proprietary Asus AIO Q-Connector for cable-free installation.

According to Guru3D, the new generation of Asus AIO coolers brings design updates to streamline system assembly. The lineup includes the standard LC model, featuring 400mm tubing attached to the radiator with ball-joint fittings for easier orientation, and the SLC variant with shortened 250mm pipes centred along the radiator.

Both versions feature a 5.08-inch IPS display with a 720×720 resolution on the pump block. Users can display images, video, or real-time metrics using the new Asus InfoHub software application. Cable management is handled by Asus's AIO Q-Connector system, which uses a USB-C port under the screen to interface with Pogo pins, transferring power and data directly through contact points on select motherboards. Currently, compatible motherboards include the ROG Crosshair X870E Glacial, ROG Crosshair X870E Dark Hero, and ROG Strix X870E-E/A Gaming WIFI7 Neo.

Airflow is driven by three 120mm fans combined into a single unified frame to minimise cable clutter. These fans operate between 800RPM and 2500RPM, delivering up to 82.57CFM of airflow and 4.36mmH2O of static pressure through a combined PWM and RGB connection. The coolers are compatible with AMD AM4 and AM5 sockets, as well as Intel LGA1700 and LGA1851 platforms. Pricing for the series starts at around €220.

KitGuru says: The inclusion of a cable-free contact system and a unified fan frame shows Asus is now focusing on cleaner aesthetics. However, you'll need a compatible motherboard to take full advantage of these AIOs.

The post New Asus ROG Strix LC IV AIO coolers feature wireless Q-Connector module first appeared on KitGuru.

Noctua introduces its first AIO liquid coolers

17 June 2026 at 15:30

Noctua has introduced its first AIO liquid CPU coolers with the launch of the NL-LC1 series. Available in 240mm, 360mm, and 420mm form factors, the closed-loop coolers are built on Asetek's latest technology, along with custom acoustic optimisations from Noctua. 

To address pump noise, Noctua integrates its custom NL-PNA1 pump noise absorber. This design uses a three-layer acoustic soundproofing structure and a tuned-mass damper effect to reduce airborne noise and structure-borne vibrations. Users can choose among three pump speed profiles via an integrated mode switch, including quiet, balanced, and manual control modes.

The series uses NF-A12x25 G2 and NF-A14x25 G2 fans depending on the radiator size. These fans use a specific speed offset to prevent undesirable harmonics, such as periodic humming. For users wanting extra VRM or RAM ventilation, the magnetically attaching faceplate can be replaced with an optional NL-ACF1 auxiliary cooling fan. Installation is handled through the SecuFirm2+ mounting system, which provides offset mounting choices.

Each package includes NT-H2 thermal paste and comes backed by a 6-year manufacturer's warranty. The series is now available, with the NL-LC1-24 priced at $219.90/€219.90, the NL-LC1-36 at $249.90/€249.90, and the NL-LC1-42 at $279.90/€279.90. The separate NL-ACF1 auxiliary fan costs $19.90/€19.90.

KitGuru says: Entering the liquid cooling market is a massive step for Noctua. Now we'll just have to wait and see how these perform in real world testing. 

The post Noctua introduces its first AIO liquid coolers first appeared on KitGuru.

Einarex reveals Orbit AIO with real-time system monitoring

9 June 2026 at 14:00

Einarex has officially introduced the Orbit AIO liquid cooling series, featuring an integrated circular digital display built directly into the pump block. 

The built-in screen allows users to monitor CPU and GPU temperatures, as well as CPU and RAM usage simultaneously. Beyond its monitoring capabilities, the Orbit series leverages the Einarex's Vertex platform, combining a pure-copper cold plate with a pump that runs at up to 2800RPM.

To cool the radiator, the AIO ships with EX12A PWM fans with fluid dynamic bearings. These fans are capable of speeds up to 2600RPM, pushing up to 82.9CFM of airflow with a static pressure of 4.16mmH2O. Builders can choose between 240mm and 360mm configurations, with both sizes available in black and white colour variants.

The cooler is compatible with AMD AM5 and AM4 platforms, as well as Intel LGA 1851/1700/1200/115x/20xx sockets.

KitGuru says: We've seen plenty of AIOs featuring displays, but most only show CPU stats. With the Orbit AIO, you'll be able to monitor other components as well. 

The post Einarex reveals Orbit AIO with real-time system monitoring first appeared on KitGuru.

Computex 2026: Cougar shows off huge range of new hardware

6 June 2026 at 09:00

In our latest Computex video, we check out a huge range of new hardware coming from Cougar, from new gaming sit/stand desk options, to new AIOs, cases and peripherals.

Watch via YouTube below:

Cougar's chassis range expands with the NU 700 full‑tower and NU 500 mid‑tower, both supporting E‑ATX, SSI‑EEB and CEB motherboards alongside dual‑GPU layouts. The NU 700 accommodates two PSUs and up to dual 360mm or a single 420mm radiator, while the NU 500 supports a front‑mounted 360mm unit. As you may expect, both of these are positioned towards the workstation market, rather than for gamers.

Cougar is also introducing the Duoair series, which shifts the PSU to the front to create a vertical intake path for airflow. The CFV220 goes in a different direction, adding a Central Flow Vent chamber, triple‑glass side panels and compatibility with reverse‑connector motherboards, making it ideal for a showcase gaming build.

In cooling, Cougar unveiled the LQX Pro 360 and LQX Elite 360 AIOs, both using VRX PWM fans. The Pro model integrates a 3.95‑inch 720×720 IPS display and a VRM fan, while the Elite version replaces the screen with a frosted ARGB panel. Air‑cooling options include the FRZ 612 dual‑tower and FRZ 412 ARGB single‑tower coolers, each with a digital temperature display, plus the display‑free FRZ 412 Elite ARGB.

Cougar’s PSU lineup now scales up to 3200W with the WS 3200, 2400, 2000 and 1600 models, all ATX 3.1 and PCIe 5.1 compliant with up to four 12V‑2×6 connectors. The Polar V2 series introduces a compact 150mm frame, while the PV series offers 80 Plus Platinum efficiency.

The furniture range includes the Arker chair with a steel frame and extendable footrest, the Speeder Elite mesh chair with full ergonomic adjustments, and the suede‑style Fusion EX. Cougar is also showing the E‑Ares 160 sit‑stand desk and the fixed‑height Ares 160, both using a carbon‑fibre laminate surface.

Finally for peripherals, Cougar has the new 58g Revenger Pro 8K mouse with a 30,000 DPI Pixart sensor and the Phaze 8K wired 98% keyboard, which features an 8K polling rate, 4K scan rate and magnetic switches.

KitGuru says: Did anything at Cougar's booth catch your eye? 

The post Computex 2026: Cougar shows off huge range of new hardware first appeared on KitGuru.

Sama to reveal case prototypes, PSUs and AIO coolers at Computex 2026

28 May 2026 at 08:30

Sama has announced its product showcase for Computex 2026, which takes place next week. At the event, they will preview the upcoming lineup of PC cases, as well as new AIO liquid coolers and power supplies.

The showcase includes two PC case prototypes designed around alternative internal layouts. The Sama V80 features a dual-curved tempered-glass front panel built into a floating chassis design with integrated ambient lighting, a built-in 60W fast-charging port, and an isolated internal airflow duct directed at the graphics card. The Sama V70 relies on a front-mounted power supply to clear up internal viewing angles, shifting away from a traditional box-shaped exterior.

Sama is also expanding its AIO liquid cooling lineup with the Q80. This one has a metal-finish enclosure and a dual-screen configuration with interchangeable 4-inch and 6-inch IPS display panels, letting users separate hardware-monitoring from desktop content. The Sama Q40 uses a motorised rotating outer ring on the pump block to produce three-dimensional physical motion, paired with a central customisable LCD and three pre-installed 28mm-thick cooling fans trimmed with side-facing ARGB infinity mirrors.

As for the PSUs, the lineup has been updated with a series of new models, including the P1650, P1350, P1200, P1000, G1000, and G850. The entire lineup complies with Intel ATX 3.1 and PCIe 5.1 standards, and feature a fully modular cable layout.

KitGuru says: Interested in any of Sama's new hardware being shown at Computex 2026?

The post Sama to reveal case prototypes, PSUs and AIO coolers at Computex 2026 first appeared on KitGuru.

Einarex unveils Halox liquid coolers with open-structure pump block

26 May 2026 at 15:00

Einarex has officially introduced the Halox series, a new line of AIO liquid coolers with an unconventional open-structure pump design. Moving away from traditional solid, enclosed housings, the hardware leaves its internal pump block area hollow to establish distinct structural layers and visible depth inside the chassis.

According to the manufacturer, the open-pump-block architecture of the Einarex Halox series results in a lighter visual layout that suits panoramic and dual-chamber cases, where component visibility is more important. The RGB lighting setup is also integrated into this hollow space, diffusing light through the opening to produce a 3D illumination effect. The pump runs at a maximum speed of around 2800 RPM.

Thermal performance is tailored for high-performance CPUs. The radiator and fan assemblies are designed to fit into most PC cases, while maintaining balanced airflow and heat dissipation under sustained processing loads. For the fans, Einarex chose hydraulic-bearing units that spin up to 2600RPM, generating up to 82.9CFM of airflow and 40.7dBA of noise at maximum speeds.

The Einarex Halox AIO liquid coolers will be available in 240mm and 360mm radiator sizes, in both black and white colour options. As you would expect, these units are compatible with Intel LGA 1851/1700/1200/115/20xx sockets, as well as AMD AM4 and AM5 sockets.

Discuss on our Facebook page, HERE.

KitGuru says: Would you like to put one of these inside of your system? 

The post Einarex unveils Halox liquid coolers with open-structure pump block first appeared on KitGuru.

Antec Vortex View 360 AIO CPU Cooler Review

11 March 2026 at 10:30

Today we’re taking a look at the Antec Vortex View 360, a premium 360mm AIO cooler built around Asetek’s latest 9th-generation pump design, featuring an integrated 5-inch 360-degree rotatable IPS display. On paper, Antec is targeting both strong thermal performance and a high level of visual customisation with the Vortex View 360. In this review, we’ll be testing installation, build quality, acoustics and, of course, thermal performance to see how it compares against other 360mm AIOs.

Timestamps:

00:00 Intro
00:44 Pricing and key details
01:42 Closer look – radiator
03:29 CPU block + screen!
07:00 Tranquil fans
08:19 Other accessories
09:09 Installation process
10:30 Screen software
11:41 Acoustics and thermals
13:48 Closing thoughts

Features:

  • Huge 5-inch IPS display — Vortex View 360 is equipped with a 1280 x 720 IPS panel that can be oriented through 360 degrees to suit your build, perfect for monitoring real-time system stats or custom visuals that show through your chassis side panel.
  • 9th-Gen Asetek cooling platform with quieter pump — engineered for up to ~400 W TDP cooling power with reduced vibration and optimised acoustics, pairing performance with lower noise.
  • Integrated iUnity 2.0 — Users can fine-tune fan and pump curves, customise lighting zones and control what the display shows, all through Antec’s updated iUnity 2.0 software.

Specifications:

  • CPU Socket Compatibility: Intel: LGA115X / 1200 / 1700 / 1851, AMD: AM4 / AM5
  • Radiator Material: Aluminium
  • Radiator Dimensions: 394 × 120 × 27 mm
  • Pump Speed: up to 3000RPM
  • Pump Noise: ≤27 dB(A)
  • Cold Plate Material: Micro Skived Copper
  • Pump Connector: 4-pin Molex
  • Fan Dimensions: 120 × 120 × 25 mm
  • Fan Speed (PWM): 400 ±100 ~ 2000 ±150 RPM
  • Air flow: 59.23 CFM (max.)
  • Air Pressure: 2.46 mmH₂O (max.)
  • Fan Noise: 28.6 dB(A)
  • Fan Connector: 4-pin PWM
  • LCD Screen: IPS 1280 x 720 resolution, 60Hz refresh, 300 nits brightness
  • Warranty: 6 Years

Test System Specifications:

The post Antec Vortex View 360 AIO CPU Cooler Review first appeared on KitGuru.
❌
❌