DeepCool has introduced the CG590 Mesh 2F, a new mid-tower chassis featuring a mesh front panel, a dual-chamber interior, and two pre-installed 160mm ARGB intake fans. The case is scheduled to launch in Japan soon, but a wider global release is expected. 

Designed for gaming and enthusiast systems, according to Guru3D, this enclosure uses a dual-chamber construction that separates the PSU and storage devices from the primary motherboard compartment. This layout creates a direct airflow path toward the graphics card and CPU cooler while reducing cable congestion. Fresh air is supplied by the two pre-installed 160mm front intake fans through the mesh panel.

Hardware supported includes ATX, mATX, and Mini-ITX motherboards, graphics cards up to 410mm in length, CPU air coolers up to 160mm tall, and PSUs up to 210mm long. DeepCool provides 45mm of cable-routing clearance behind the motherboard tray and includes native support for rear-connector motherboard designs. Cooling flexibility extends to various fan configurations, allowing up to three 120mm or two 140mm fans on top, three 120mm side fans, two 120mm rear fans, and three 120mm bottom fans. Liquid cooling setups can house radiators up to 360mm on the top, side, or bottom, with the top section also supporting 280mm options.

The front I/O panel integrates one USB-C 3.2 Gen 2 port, two USB-A 3.0 ports, and a combined audio jack. Deepcool will launch the CG590 Mesh 2F in Japan on July 24th, with an estimated retail price of $89. 

KitGuru Says: DeepCool's CG590 MESH 2F may offer a competitive feature set for its price bracket, particularly with its support for massive 160mm intake fans and rear-connector motherboards.

The post DeepCool introduces CG590 Mesh 2F case with dual 160mm ARGB fans first appeared on KitGuru.

Following on from our factory visit, Leo now takes an in-depth look at all of the new products they have brought to Computex, from a new AK700VC vapor chamber cooler and next-gen Assassin, to new workstation-grade hardware and more.

Watch via YouTube below:

Timestamps:
00:00 Assassin 5 Vision
01:04 AK700 VC and low profile cooler
02:23 Station X 620
02:37 CL600 Case
03:50 CH170 Plus
04:10 DeepCool Software
04:24 Silentnox Pro 360
05:03 CH690 LCD Case
05:22 LT360 Vision ARGB
06:02 More Fans
06:50 Prototype PC
07:27 Power Supplies
08:26 Suspended fans

At Computex this year, DeepCool arrived armed with its new Assassin 5 Vision CPU cooler, utilising a new 2.0 Vapor Chamber design to improve heat transfer. As the Vision in the name implies, there is an LCD screen that sits on top of the cooler, giving you quick access to stats like CPU temperature and fan speed at a glance. DeepCool also has the AN600 VC for more compact systems, and the AK700 VC in black and white colour options.

For the workstation crowd, DeepCool is launching the Station X 620, a new air cooler built specifically for extremely high core-count CPUs, capable of handling up to a 520W TDP.

DeepCool also has its new SILENTNOX PRO 360 AIO, the very first from the company to feature a curved display on the pump block, with an even higher 2K resolution for better visuals.

DeepCool’s latest fans employ new dynamic balancing standards to reduce vibrations and resonance, further improving acoustic performance.

On the chassis front, DeepCool has the new CH690, designed for modern builds with a panoramic view of the internal components, alongside four pre-installed ARGB fans and an integrated display. There is also the CH170 Plus UES launching this year – an upgraded version of the compact chassis with new quick-release side panels for easier access to the internals for upgrades or maintenance.

KitGuru Says: What did you make of DeepCool's showing at Computex this year?

The post Computex 2026: DeepCool reveals new Assassin 5, new vapor chamber coolers and more first appeared on KitGuru.

DeepCool has a solution to the problem where your CPU gets cooked by heat rising from your mighty 600W graphics card. That solution is named Hypersplit and it is the focus in our review of the DeepCool CL6600 PC case which comes complete with a 360mm AIO cooler.

Timestamps:

00:00 Start
00:55 Removing panels / AIO
05:11 Building a system inside the case
08:40 Noise, smoke and thermal testing
10:54 Leo’s Closing thoughts

Main features

• SPLIT FOR PERFECT FLOW: CL6600 keeps things cooler with a modular split-chamber layout. It places the radiator in its own zone, creating separate airflow paths for heat-generating components and letting the whole system run at its best.
• BALANCE IN LAYERS: A raised top chamber redefines the overall silhouette while keeping space organised. Vertical grille bars at the front provide natural ventilation and create visual rhythm, with real wood adding an organic finish to the clean, modern aesthetic
• Pre-installed 360mm ARGB Liquid Cooler: Advanced pump with adjustable speeds from 2500–3400 RPM, balancing high efficiency with quiet operation. Triple high-performance FDB fans on the radiator ensure steady, reliable airflow. DeepCool’s short-tube design keeps the main chamber neat and visually open.
• Includes 2x FL12R SE ARGB Fans: Dual reverse-blade fans at the bottom nest lower to pull in fresh air without crowding your build.

Specification:

• Motherboard support: ATX, Micro-ATX, Mini-ITX.
• Power supply support: ATX, SFX-L, SFX.
• Expansion slots: 7.
• Included fans: 2x FL12R SE ARGB 120mm intakes in floor.
• Fan mounts: 3x 120mm/2x 140mm front, 2x 120/140mm roof, 1x 120mm rear, 1x 120mm floor.
• Radiator mounts: 360mm/280mm front, 240mm/280mm roof, 120mm/140mm rear.
• 5.25-inch optical drive bays: None.
• Internal drive bays: 2x 3.5-inch/2.5-inch, 3x 2.5-inch.
• Front I/O ports: 1x USB 3.0 type-A, 1x USB 3.1 type-C, audio.
• Dimensions: 453mm H x 409mm D x 217mm W.

Testing

To put this case through its cooling paces we will be using a test system consisting of an AMD Ryzen 7 9850X3D, Palit RTX 5080 and an SSD. This system allows us to produce a substantial amount of heat and effectively test the DeepCool CL6600‘s cooling capabilities.

Test System:

• Processor: AMD Ryzen 7 9850X3D
• CPU Cooler: included DeepCool 360mm AIO
• Case fans: 3x DeepCool FT14
• Motherboard: MSI MAG X870E Tomahawk Max WiFi PZ
• Memory: Thermaltake ToughRAM XG D5 32GB DDR5-6000
• Graphics card: Palit GeForce RTX 5080 Gaming OC
• Power supply: DeepCool PN1200M 1200W Gold
• SSD: Crucial T700 M.2 NVMe
• OS: Windows 11

Cooling Performance

We can see the benefit of the separate Hypersplit chamber that houses the CPU cooler, but it is not all good news. The downside is that you get best results when you crank up the sped of the fans on the AIO cooler, which can get noisy. The benefit is that both the CPU and graphics card run at pleasingly low temperatures.

Closing Thoughts

We are familiar with the concept of a triple chamber case from our review of the Corsair Air 5400 which is an expensive case that works very well. By contrast the DeepCool CL6600 offers decent value for money and employs a simple design concept where the included AIO is housed in a separate chamber that sits on top of the case.

This approach works well and opens up the main chamber for your graphics card, but we have to talk about the looks of the CL6600 which are unusual and a bit quirky. Or rather, the main chamber is entirely conventional and looks good, but the Hypersplit chamber on top looks like a box has been dropped on top of your PC.

We don't see any way round this as it is fundamental to the design but the benefit is that this case and 360mm AIO cooler are delivered at a low price.

You can buy the DeepCool CL6600 for £156 HERE.

Pros:

• Simple design separates the CPU cooler from the graphics card.
• 360mm AIO cooler is included in the price.
• Split bottom air filters are very convenient.
• The headphone holder is neat.

Cons:

• The Hypersplit chamber on top of the case look rather clunky.
• Front IO panel is in awkward location if your PC is on the floor.
• The printed user guide is tiny
• CPU cooling is average.

KitGuru says:The DeepCool CL6600 is new, interesting and different. Balanced against that it is slightly odd.

The post DeepCool CL6600 Case Review: Hypersplit technology? first appeared on KitGuru.

Ahead of Computex 2026, KitGuru was invited to an exclusive tour of the DeepCool’s latest production line – including an in-depth technical briefing on improvements to key products. In our video we go over DeepCool's next-generation vapour chamber coolers, new fan designs, as well as how DeepCool makes and tests its products.

Timestamps:
00:00 Deepcool Head Office
01:13 AK700 VC
03:03 Diffusion Bonding Oven
03:30 Manufacturing/Testing of the cooling system
06:20 Leakage and Heat Testing
07:02 New Fan Design
08:24 Injection Moulding
09:51 Wheel Balancing / Assembly
12:46 Final touches
13:28 Packaging and final checks

DeepCool created its first vapour chamber cooler just over 2 years ago, but they believed that the results could be improved significantly. Towards the end of 2025, DeepCool recruited half a dozen engineers with a lot of experience in this technology, and work began on new designs, as well as investment in new production methods.

In a Vapour Chamber, the main chamber consists of a copper top and bottom. The top has to be melded with a specific mesh to allow for even heat dissipation and to encourage the vapour to condense in an endless cycle. The bottom of the chamber needs to have a combination of large and small pillars, which create flow patterns inside the unit. After that, the top and bottom parts need to be fused together at extremely high temperatures.

DeepCool also has its own injection moulding facility, which it uses for creating new fans. Through testing here, DeepCool has enabled new winding techniques for the wire in the core of its fans, and different material combinations for its fan blades. It has also managed to improve stability, reducing wobble and noise, while also bringing improvements to effective airflow.

We will see all of this come together at Computex 2026 with the reveal of the AK700 VC, DeepCool's new single-fan vapour chamber CPU cooler. At the event, DeepCool will also show off the new Assassin V cooler, which also has a new vapour chamber design.

KitGuru Says: We will see more of these products at Computex 2026, so keep an eye out for our coverage next week.

The post KitGuru visits the DeepCool factory! first appeared on KitGuru.

We've seen a lot of AIO CPU coolers with screens integrated into the CPU block. DeepCool is looking to make this the centrepiece of your build with the new LT360 Vision ARGB, which mounts a massive 4.5-inch IPS screen onto the cooler. 

The centrepiece of this 360mm cooler is a 4.5-inch IPS display with an 854×480 resolution. Better yet, there are multiple mounting orientations and an included adjustable hinge lets you angle the display by up to 90°.

To manage the cooler, DeepCool has introduced its DeepCreative software suite. Beyond the standard fare of monitoring clock speeds or displaying cat GIFs, the software supports full MP4 video playback. Moreover, it features the D-Cast mode, a “screen extension” functionality that allows the pump display to act as a genuine secondary monitor within Windows.

Underneath the visual flair of the LT360 Vision ARGB, DeepCool is using a 6th-generation pump with a 3-phase, 6-slot, 4-pole motor featuring FOC (Field Oriented Control), which allows it to reach up to 3,400 RPM. Moreover, the cooler uses the company's newly designed, open-frame ARGB fans with a fully enclosed ring-blade tip structure that promises improved airflow uniformity and lower noise levels.

KitGuru says: Would you like to put one of these into your system? 

The post DeepCool LT360 Vision ARGB AIO cooler arrives with massive 4.5-inch IPS flip-screen first appeared on KitGuru.